EC Declaration of Conformity Intended use The tool is intended for chiselling work in concrete, We Makita Corporation as the responsible manufac- brick, stone and asphalt as well as for driving and com- turer declare that the following Makita machine(s): pacting with appropriate accessories.
Tomoyasu Kato Director 13. Prevent unintentional starting. Ensure the Makita Corporation switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with that have the switch on invites accidents.
26. Follow instruction for lubricating and chang- FUNCTIONAL ing accessories. 27. Keep handles dry, clean and free from oil and DESCRIPTION grease. HAMMER SAFETY WARNINGS CAUTION: Wear ear protectors. Exposure to noise can cause hearing loss. on the tool. Use auxiliary handle(s), if supplied with the tool.
Number on adjusting dial Blows per minute Side handle (auxiliary handle) 1,900 1,700 1,450 1,200 NOTE: than those on load in order to reduce vibration under no load, but this does not show trouble. Once operation starts with a bit against con- crete, blows per minute increase and get to the the tool may not have this function even with the motor rotating.
Authorized Service Centers only. This tool requires no hourly or daily lubrication because it has a grease-packed lubrication system. It should be relubricated regularly. Send the complete tool to Makita service. 1. Change ring cover formed by Makita Authorized Service Centers, always The bit can be secured at 12 different angles.
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regard- ing these accessories, ask your local Makita Service Center. NOTE: Some items in the list may be included in the tool package as standard accessories. They may differ from country to country.
Page 8
M a k i t a C o r p o r a t i o n 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 20160926 www.makita.com...