SPECIFICATIONS Model HM1214C Blows per minute 950 - 1,900 min Overall length 700 mm Net weight 12.3 kg Safety class • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. • Note: Specifications may differ from country to country.
Page 3
14. Do not overreach. Keep proper footing and SPECIFIC SAFETY RULES balance at all times. This enables better control of the power tool in unexpected situations. DO NOT let comfort or familiarity with product 15. Dress properly. Do not wear loose clothing or (gained from repeated use) replace strict adherence jewellery.
Number on adjusting dial Blows per minute FUNCTIONAL 1,900 DESCRIPTION 1,700 1,450 1,200 CAUTION: NOTE: • Always be sure that the tool is switched off and unplugged before adjusting or checking function • Blows at no load per minute becomes smaller on the tool.
Page 5
Side handle (auxiliary handle) After installing, always make sure that the bit is securely held in place by trying to pull it out. To remove the bit, pull the releasing cover down all the ► 1. Side handle 2. Clamp nut way and pull the bit out.
CAUTION: • These accessories or attachments are recom- mended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.