The Sce8000-Sip; The 1-Port 10Gbe Spa Interface Module - Cisco SCE8000 Configuration Manual

Introduction to SIPs and SPAs

The SCE8000-SIP

Table 2-5
Table 2-5
LEDs
Status

The 1-Port 10GBE SPA Interface Module

The SCE8000-SIP is installed in slot #3 of the Cisco SCE8000 chassis. It hosts up to four single-width,
single-height 1-Port 10GBE SPA interface modules, but in the Cisco SCE8000, it must be configured
with either two 1-Port 10GBE SPAs (in the top two subslots) or four 1-Port 10GBE SPAs, to provide
interfaces for either one or two complete traffic links.
module and
Figure 2-6
Cisco SCE8000 10GBE Installation and Configuration Guide
2-8
list the status and description of the SCE8000-SIP LED.
SCE8000-SIP LED
Description
• Green —Operational
• Flashing Amber - Electrical bypass in operation
• Red - Not initialized or failed
Unlit —No power
•
Table 2-6 lists the SPA module ports and
1-Port 10GBE SPA Interface Module
1
Chapter 2 Introduction to the Cisco SCE8000 10GBE Platform
Figure 2-6 provides an illustration of the SPA
Table 2-7 lists the SPA module LEDs.
SPA-1X10GE-L-V2
2
OL-16478-05