SeeSnake
Record
Button
Return
Button
Power
Button
Figure 9: DVD
Power
Button
Return
Button
Record
Button
Figure 10: DVDR Buttons
14
Microphone
Keypad
Arrow
Stop Button
Buttons
Eject Button
Pak
Controls
Stop Button
Arrow
Buttons
Eject Button
DVDR
Enter/
Select Button
Ridge Tool Company
Operating Instructions
Starting Up
1. Check the unit is properly set up.
2. Connect the DVDPak either to the SeeSnake
camera directly or to an external SeeSnake
monitor using the RCA cable.
3. Place the camera head into the reel's guide hoop
and turn the DVDPak's power on
4. If there is a disk in the DVD tray, the system will
do a disk check. It will ask for a disk if none is
found.
5. To insert a disk, press the Eject button
insert a blank DVD-R or DVD-RW into the tray.
Close the tray by pressing the Eject Button.
NOTICE
6.
Make sure the plug seal is
opened before ejecting the disk tray. This will
avoid damaging the tray mechanism.
7. If the system finds an unformatted disk it will ask
permission to format it. Press RETURN
format. The unit will not record to an unformatted
disk.
8. Close the DVDPak front plug seal to protect
against dust and moisture.
.
and
to