Chapter 7: Specification; Pv 62X Models - GE Druck PV 622 User Manual

7.1 PV 62x models

Operating temperature
Storage temperature
Humidity
Shock/Vibration
EMC
Electrical safety
Pressure safety
Approved
Size (L: W: H)
Weight (Pressure stations,
calibrator and pressure
module)
Pressure connections
Hydraulic fluid (PV 623
models only)
Power supply
*Caution: PV 623 models only. Ice in the pressure mechanism can cause damage. If the
temperature is less than 4°C (39°F), drain all water from the instrument.
[EN] English - K0457
For a full specification of the PV 62x pressure stations, refer to
the datasheet supplied on the CD (CD: P/N UD-0002)
Table 7-1: General specification (PV 62x
-10 to 50°C (14 to 122°F)
PV 623 models only: See Caution *
-20 to 70°C (-4 to 158°F)
PV 623 models only: See Caution *
0 to 90% relative humidity (RH) non-condensing
Def Stan 66-31, 8.4 cat III
Electromagnetic compatibility: BS EN 61326-1:2006
Electrical - BS EN 61010:2001
Pressure Equipment Directive - Class: Sound Engineering Practice
(SEP)
CE Marked
PV 621 and
PV 623: ≈ 350 x 160 x 150 mm (13.8 x 6.3 x 5.9 in)
PV 622: ≈ 350 x 160 x 160 mm (13.8 x 6.3 x 6.3 in)
PV 621 only: ≈ 2.65 kg (5.8 lb)
PV 622 only: ≈ 3.30 kg (7.3 lb)
PV 623 only: ≈ 3.75 kg (8.3 lb)
DPI 620 only: ≈ 0.57 kg (1.3 lb) - battery included.
PM 620 only: ≈ 0.11 kg (0.2 lb)
Test port: G1/8 or 1/8NPT "Quick fit" pressure adaptors supplied.
Other options are available; see Section 1.5 (Accessories).
Other connections: For specified accessories only.
Reservoir capacity: 100 cm
Fluid type: Demineralised water or a mineral oil (Recommended
ISO viscosity grade ≤ 22)
None. If you attach a DPI 620 calibrator to make a pressure calibrator,
all the power comes from the DPI 620 calibrator.

Chapter 7: Specification

)
3 3
(6.1 in )
Specification 7-1