Makita DGA700 Instruction Manual page 8

Indicating the remaining battery
capacity
Only for battery cartridges with the indicator
1. Indicator lamps 2. Check button
light up for a few seconds.
Indicator lamps
Lighted Off
NOTE: Depending on the conditions of use and the
Tool / battery protection system
placed under one of the following conditions:
1
2
-
Remaining
capacity
Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
malfunctioned.
-
-
1.
When the tool is operated in a manner that causes it to
tool off and stop the application that caused the tool to
When the tool or batteries is overheated, the tool stops
seconds. In this situation, let the tool and batteries cool
before turning the tool on again.
On
On
8 ENGLISH
1
Off
Blinking
Off
Blinking