Ec Declaration Of Conformity; Safety Warnings - Makita DGA700 Instruction Manual

WARNING:
use of the power tool can differ from the declared
tool is used.
WARNING:
to protect the operator that are based on an estima-
the times when the tool is switched off and when it is
WARNING:
value is used for main applications of the power tool.
However if the power tool is used for other applica-

EC Declaration of Conformity

For European countries only
to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
with this power tool. Failure to follow all instructions
tions for future reference.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2.
liquids, gases or dust. Power tools create sparks
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
Electrical Safety
1.
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
reduce risk of electric shock.
2.
surfaces, such as pipes, radiators, ranges and
refrigerators.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4.
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
increase the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
a cord suitable for outdoor use reduces the risk of
electric shock.
6. If operating a power tool in a damp location
(RCD) protected supply.
the risk of electric shock.
7. Power tools can produce electromagnetic
However, users of pacemakers and other similar
medical devices should contact the maker of their
device and/or doctor for advice before operating
this power tool.
Personal Safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
ication.
2.
wear eye protection.
hearing protection used for appropriate conditions
3.
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool.
-
that have the switch on invites accidents.
4.
turning the power tool on.
5.
balance at all times.
of the power tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or
-
long hair can be caught in moving parts.
7.
dust extraction and collection facilities, ensure
these are connected and properly used.
dust collection can reduce dust-related hazards.
8. Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles.
second.
9.
The goggles must comply with ANSI Z87.1 in
-
the USA, EN 166 in Europe, or AS/NZS 1336
in Australia/New Zealand. In Australia/New
Zealand, it is legally required to wear a face
shield to protect your face, too.
3 ENGLISH
Damaged or entangled cords
-