Functional Description - Makita DGA700 Instruction Manual

4. If electrolyte gets into your eyes, rinse them
out with clear water and seek medical atten-
tion right away. It may result in loss of your
eyesight.
5. Do not short the battery cartridge:
Do not touch the terminals with any con-
nails, coins, etc.
Do not expose battery cartridge to water
or rain.
A battery short can cause a large current
breakdown.
6. Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50 °C (122 °F).
7.
8. Be careful not to drop or strike battery.
9. Do not use a damaged battery.
10.
to the Dangerous Goods Legislation require-
ments.
aging and labeling must be observed.
For preparation of the item being shipped, consult-
national regulations.
around in the packaging.
11. Follow your local regulations relating to dis-
posal of battery.
SAVE THESE INSTRUCTIONS.
CAUTION:
Only use genuine Makita batteries.
charger.
Tips for maintaining maximum
battery life
1. Charge the battery cartridge before completely
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
2.
3. Charge the battery cartridge with room tem-
perature at 10 °C - 40 °C (50 °F - 104 °F). Let
a hot battery cartridge cool down before
charging it.
4. Charge the battery cartridge if you do not use
it for a long period (more than six months).
FUNCTIONAL
DESCRIPTION
CAUTION:
-
cartridge
CAUTION:
CAUTION:
cartridge.
1
-
1. Red indicator 2. Button 3.
while sliding the button on the front of the cartridge.
CAUTION:
fully until the red indicator cannot be seen. If not,
CAUTION:
forcibly.
-
7 ENGLISH
Always be sure that the tool is
Always switch off the tool before
Hold the tool and the battery car-
2
Always install the battery cartridge
Do not install the battery cartridge
3