Ec Declaration Of Conformity; General Power Tool Safety Warnings; Save All Warnings And Instruc- Tions For Future Reference - Makita GA7060 Instruction Manual

Model GA7060R
Work mode: surface grinding with normal side grip
h, AG
Work mode: surface grinding with anti vibration side grip
h, AG
Work mode: disc sanding with normal side grip
h, DS
Work mode: disc sanding with anti vibration side grip
h, DS
Model GA9060
Work mode: surface grinding with normal side grip
h, AG
Work mode: surface grinding with anti vibration side grip
h, AG
Work mode: disc sanding with normal side grip
h, DS
Work mode: disc sanding with anti vibration side grip
h, DS
Model GA9060R
Work mode: surface grinding with normal side grip
h, AG
Work mode: surface grinding with anti vibration side grip
h, AG
Work mode: disc sanding with normal side grip
h, DS
Work mode: disc sanding with anti vibration side grip
h, DS
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
another.
NOTE: The declared vibration emission value
exposure.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared
tool is used.
WARNING:
to protect the operator that are based on an estima-
the times when the tool is switched off and when it is
WARNING:
The declared vibration emission
value is used for main applications of the power tool.
However if the power tool is used for other applica-
2
2
2
2
2
2
2
2
2
2
2
2
2
or less
2
2
or less
2
2
2
2
2
2
or less
2
2
or less
2

EC Declaration of Conformity

For European countries only
Designation of Machine: Angle Grinder
standard or standardized documents: EN60745
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
17.6.2015
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

General power tool safety warnings

WARNING:
Read all safety warnings and
all instructions. Failure to follow the warnings and
Save all warnings and instruc-
tions for future reference.
Work area safety
1. Keep work area clean and well lit.
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
liquids, gases or dust.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
3 ENGLISH