Maintenance - Makita GA7060 Instruction Manual

Operation with wire wheel brush
Optional accessory
CAUTION:
Check operation of wire wheel
brush by running tool with no load, insuring that
no one is in front of or in line with the wire wheel
brush.
CAUTION:
Do not use wire wheel brush that
is damaged, or which is out of balance. Use of
damaged wire wheel brush could increase potential
CAUTION:
ALWAYS use guard with wire
inside guard. Wheel can shatter during use and
1. Wire wheel brush
access to spindle.
brush onto spindle and tighten with the wrenches.
NOTICE:
Avoid applying too much pressure
which causes over bending of wires when
using wire wheel brush.
breakage.

MAINTENANCE

CAUTION:
Always be sure that the tool is
switched off and unplugged before attempting to
perform inspection or maintenance.
NOTICE:
alcohol or the like. Discoloration, deformation or
cracks may result.
Air vent cleaning
The tool and its air vents have to be kept clean.
vents start to become obstructed.
1
1. Exhaust vent 2. Inhalation vent
NOTE: Do not loosen the screw on the name
1. Screw
To maintain product SAFETY and RELIABILITY,
12 ENGLISH
Never use gasoline, benzine, thinner,
1
2
1