Makita GA4530R Instruction Manual
Hide thumbs
Also See for GA4530R:
- Instruction manual (129 pages) ,
- Instruction manual (73 pages) ,
- Instruction manual (93 pages)
Related Manuals for Makita GA4530R
Summary of Contents for Makita GA4530R
- Page 1 INSTRUCTION MANUAL Angle Grinder GA4030R GA4530R GA5030R DOUBLE INSULATION Read before use.
-
Page 2: Specifications
Wear safety glasses. Vibration emission (a ) : 2.5 m/s or less h, DS Uncertainty (K) : 1.5 m/s Model GA4530R DOUBLE INSULATION Work mode: surface grinding Vibration emission (a ) : 7.5 m/s h, AG Uncertainty (K) : 1.5 m/s... -
Page 3: Ec Declaration Of Conformity
Designation of Machine: Angle Grinder (RCD) protected supply. Use of an RCD reduces Model No./ Type: GA4030R, GA4530R, GA5030R the risk of electric shock. Conforms to the following European Directives: Use of power supply via an RCD with a rated... -
Page 4: Grinder Safety Warnings
Do not use the power tool if the switch does The outside diameter and the thickness of your not turn it on and off. Any power tool that cannot accessory must be within the capacity rating be controlled with the switch is dangerous and of your power tool. - Page 5 15. Do not operate the power tool near flammable the side of cut-off wheel. Abrasive cut-off wheels materials. Sparks could ignite these materials. are intended for peripheral grinding, side forces applied to these wheels may cause them to 16. Do not use accessories that require liquid shatter.
-
Page 6: Functional Description
If the use of a guard is recommended for wire WARNING: DO NOT let comfort or familiarity brushing, do not allow any interference of the with product (gained from repeated use) replace wire wheel or brush with the guard. Wire wheel strict adherence to safety rules for the subject or brush may expand in diameter due to work load product. - Page 7 Installing or removing wheel guard (For depressed center wheel, flap disc, flex wheel, wire wheel brush / abrasive cut-off wheel, diamond wheel) WARNING: When using a depressed center wheel, flap disc, flex wheel or wire wheel brush, the wheel guard must be fitted on the tool so that the closed side of the guard always points toward the operator.
- Page 8 ► 1. Wheel guard 2. Bearing box 3. Screw 4. Lever ► 1. Lock nut 2. Depressed center wheel 3. Inner flange 4. Mounting part Pull the lever in direction of the arrow. Then tighten the wheel guard with fastening the screw. Be sure to tighten To tighten the lock nut, press the shaft lock firmly so the screw securely.
-
Page 9: Operation
OPERATION WARNING: It should never be necessary to force the tool. The weight of the tool applies ade- quate pressure. Forcing and excessive pressure could cause dangerous wheel breakage. WARNING: ALWAYS replace wheel if tool is dropped while grinding. WARNING: NEVER bang or hit grinding disc or wheel onto work. - Page 10 For 100 mm (4″) model Operation with abrasive cut-off / diamond wheel When installing the abrasive cut-off wheel: Optional accessory WARNING: When using an abrasive cut-off / diamond wheel, be sure to use only the special wheel guard designed for use with cut-off wheels. (In some European countries, when using a diamond wheel, the ordinary guard can be used.
-
Page 11: Maintenance
When installing the diamond wheel: Operation with wire wheel brush Optional accessory CAUTION: Check operation of wire wheel brush by running tool with no load, insuring that no one is in front of or in line with the wire wheel brush. -
Page 12: Optional Accessories
The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. 100 mm (4″) model 115 mm (4-1/2″) model... - Page 13 100 mm (4″) model 115 mm (4-1/2″) model 125 mm (5″) model Rubber pad 76 Rubber pad 100 Rubber pad 115 Abrasive disc Sanding lock nut Wire wheel brush Wire cup brush Wheel Guard (for cut-off wheel) *1 Abrasive cut-off wheel / Diamond wheel Lock nut wrench NOTE: *1 In some European countries, when using a diamond wheel, the ordinary guard can be used instead of the special guard covering the both side of the wheel.
- Page 16 Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan 885462-227 www.makita.com 20150731...