Optional Accessories - Makita PJ7000 Instruction Manual

• Always be sure that the tool is switched off
andunplugged before
inspection or maintenance.
• Never use gasoline, benzine, thinner, alcohol or
thelike. Discoloration, deformation or cracks may
result.
The tool and its air vents have to be kept clean.
Regularly clean the tool's air vents or whenever the
vents start to become obstructed. (Fig. 25)
To maintain product SAFETY and RELIABILITY,
repairs, carbon brush inspection and replacement,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers,
always using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:
• These accessories or attachments are recommendedfor
use with your Makita tool specified in this manual. The
use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory or
attachment for its stated purpose.
If you need any assistance for more details regarding these
accessories, ask your local Makita Service Center.
• Angle guide
• Dust bag
• Set plate 4
• Lock nut wrench 20
• Plate joiner blades
NOTE:
• Some items in the list may be included in the tool pack-
age as standard accessories. They may differ from
country to country.
Noise
5-1
The typical A-weighted noise level determined
according to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K): 3 dB (A)
Wear ear protection
Vibration
00-1
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode: cutting grooves in MDF
Vibration emission (a
Uncertainty (K): 1.5 m/s
• The declared vibration emission value has been
mea-sured in accordance with the standard test
method and may be used for comparing one tool
with another.
attempting to perform
): 86 dB (A)
pA
): 97 dB (A)
WA
2
): 2.5 m/s or less
h
2
• The declared vibration emission value may also
beused in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
powertool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
oper-ator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
We Makita
manufacturer
machine(s):
Designation of Machine: Plate Joiner
Model No./ Type: PJ7000 are of series
production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents: EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
ENG90
ENG9
ENG901-1
Corporation as
declare that the
5.4.2011
Tomoyasu Kato Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
ENH101-15
the responsible
following Makita