Knob
2
Perspective
H = –100
Inverting the flex shadow
In the <Invert> group of the Flex Shadow menu, select the direction to invert
the shadow.
H: Invert the shadow in the horizontal direction. The inversion is applied
around the axis of the knob 2 parameter Axis Loc V set with [Axis Loc].
V: Invert the shadow in the vertical direction. The inversion is applied around
the axis of the knob 1 parameter Axis Loc H set with [Axis Loc].
Picture
Flex shadow
After inversion
Setting a combine shadow
Use the following procedure.
1
In the Flex Shadow menu, press [Combine Shadow], turning it on.
Parameter
Adjustment
Perspective V
Add vertical perspective
Perspective
Perspective
H = +100
V = –100
Before inversion
When H is enabled
Setting values
–100.00 to +100.00
Perspective
V = +100
Before inversion
After inversion
When V is enabled
DME Special Effect Operations
43