Serial Tally Settings (Serial Tally Menu) - Sony DVS-9000SF User Manual

6
7
Deleting parallel tally settings
Use the following procedure.
1
2

Serial Tally Settings (Serial Tally Menu)

To make serial tally settings, display the Router/Tally>Serial Tally menu.
348
Setup Relating to Router Interface and Tally
Knob Parameter Adjustment
1 Address Destination address
2 Level Destination level
When setting the tally type, set the following parameters.
Knob Parameter Adjustment
3 Type Tally type
a) When you selected Group1 to 4 in the section "Setting the tally groups" (page 341), this is
1:R1, 2:G1, 3:R2, 4:G2, 5:R3, 6:G3, 7:R4, and 8:G4.
When you selected Group5 to 8, this is 1:R5, 2:G5, 3:R6, 4:G6, 5:R7, 6:G7, 7:R8, and
8:G8. (R is an abbreviation of "Red Tally," and G of "Green Tally.")
Press [Execute].
This makes the parallel tally settings, in accordance with the settings in
steps 1 to 6.
In the Router/Tally>Parallel Tally menu, using any of the following
methods, select the parallel tally whose settings you want to delete.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs.
Knob Parameter Adjustment
1 Slot No Parallel tally slot number
2 Port No Parallel tally port number
Press [Clear].
This deletes the selected parallel tally entry.
Setting values
1 to 1024
1 to 8
Setting values
a)
1 to 8
Setting values
2 to 6
1 to 54