Use the DME menu to make graphics display settings. You can make separate
settings for separate channels. To select a target DME channel, use the device
control block.
Displaying graphics
Use the following procedure.
1
In the menu control block, select the top menu selection button [DME].
The DME menu appears.
2
Select VF6 'Input/Output' and HF4 'Graphic.'
The Graphic menu appears.
3
Turn the [Graphic] button on.
The system enters graphics display mode, enabling graphics to be
displayed in the monitor screen.
4
Turn on the buttons of the graphics you want to show.
To show axes: Turn [Axis] on.
To show axis names: Turn [Axis Name] on.
To show the channel ID: Turn [Ch ID] on.
To show a wire frame: Turn [Wire Frame] on.
To show the grid: Turn [Grid] on.
To show the flex shadow axis: Turn [Flex Shadow Axis] on.
The selected graphics appear in the monitor screen.
5
If you want to shrink the graphics display to show the range not displayed
on a normal monitor, turn [Scale] on and set the following parameters.
Knob
1
As the value of the setting grows, the monitor shrinks further toward the
center point.
Parameter
Adjustment
Scale
Degree to which the graphics
display is shrunk
Setting values
0.00 to 100.00
Three-Dimensional Transformation Operations
21