Configuring Module Data Areas - GE VersaPoint IC220PBI002 User Manual

7
After adding all the modules in the I/O Station, click OK. The modules
appear under the slave node in the Hardware Configuration.

Configuring Module Data Areas

Configuring the modules' data areas assigns to each module in the
VersaPoint I/O Station the appropriate types of memory references for its
input and/or output data. To configure each module's data areas, right click
the module node in the Hardware Configuration, and choose Configure. The
Parameter Editor window for the module appears. For example:
Default addresses appear, but can be edited if required.
The individual I/O module datasheets give more information about their data
formats.
7-10 VersaPoint™ I/O System Profibus-DP NIU User's Manual – August 2005 GFK-1911B