Configuring The Modules In The I/O Station - GE VersaPoint IC220PBI002 User Manual

7

Configuring the Modules in the I/O Station

After adding the Profibus NIU to the configuration for the Master, add the
modules in the I/O Station, in the same sequence they occupy in the
hardware installation. Select the Modules tab and click Add. The Select
New Module dialog box appears.
Select a module and click OK. The module is added to the Modules list in
the slave Properties dialog box. Add additional modules as required for your
system.
To change the order (position) of a module, select it and click Properties.
The module Properties dialog box opens. Enter the numerical value of the
new position the module is to have. The position numbering starts at 0.
GFK-1911B Chapter 7 Configuration 7-9