Functional Description - Makita JR3050T Instruction Manual

FUNCTIONAL
DESCRIPTION
1
1. Shoe
2. Shoe button
B
1
1. Shoe button
2. Shoe
1. Switch trigger
2. Lock button
ASSEMBLY
CAUTION:
• Always be sure that the tool is switched off and unplugged before
adjusting or checking function on the tool.
Adjusting the shoe
005784
When the blade loses its cutting efficiency in one place along its cutting edge,
reposition the shoe to utilize a sharp, unused portion of its cutting edge. This
will help to lengthen the life of the blade. To reposition the shoe, push the shoe
button in the "A" direction with a click and reposition as shown in the figure
which allows you to make five-way adjustment. To secure the shoe, push the
shoe button in the "B" direction with a click.
A
2
005785
2
Switch action
005786
1
CAUTION:
• Before plugging in the tool, always check to see that the switch trigger
actuates properly and returns to the "OFF" position when released.
2
To start the tool, simply pull the switch trigger. Tool speed is increased by
increasing pressure on the switch trigger. Release the switch trigger to stop.
For continuous operation, pull the switch trigger and then push in the lock but-
ton.
To stop the tool from the locked position, pull the switch trigger fully, then
release it.
CAUTION:
• Always be sure that the tool is switched off and unplugged before
carrying out any work on the tool.
Installing or removing the saw blade
CAUTION:
• Always clean out all chips or foreign matter adhering to the blade, blade
clamp and/or slider. Failure to do so may cause insufficient tightening of
the blade, resulting in a serious injury.
5