Makita JR3050T Instruction Manual
Recipro saw
Hide thumbs
Also See for JR3050T:
- Instruction manual (37 pages) ,
- Technical information (12 pages) ,
- Parts breakdown (3 pages)
Related Manuals for Makita JR3050T
Summary of Contents for Makita JR3050T
- Page 1 Recipro Saw MODEL JR3050T 005783 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Page 2: Specifications
The tool is intended for sawing wood, plastic, metal and Responsible manufacturer: building materials with a strong impact. It is suitable for Makita Corporation Anjo Aichi Japan straight and curved cutting. Power supply The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. -
Page 3: General Safety Rules
GENERAL SAFETY RULES GEA001-1 WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool. -
Page 4: Additional Safety Rules For Tool
19. Store idle power tools out of the reach of chil- 22. Use the power tool, accessories and tool bits dren and do not allow persons unfamiliar with etc. in accordance with these instructions and in the power tool or these instructions to operate the manner intended for the particular type of the power tool. -
Page 5: Functional Description
FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Adjusting the shoe 005784 When the blade loses its cutting efficiency in one place along its cutting edge, reposition the shoe to utilize a sharp, unused portion of its cutting edge. -
Page 6: Operation
To install the saw blade, always make sure that the blade clamp lever is in 005787 released position on the insulation cover before inserting the saw blade. If the blade clamp lever is in fixed position, rotate the blade clamp lever in the direction of the arrow so that it can be locked at the released positon 1. -
Page 7: Accessories
CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. - Page 8 Makita Corporation Anjo, Aichi, Japan 884568B228...