HIKVISION DS-3WF01C-2N User Manual page 58

User Manual of DS-3WF01C-2N
Figure 7-33 Ping Watchdog
Ping IP Address： Specify an IP address of the target which will be monitored by Ping
Watchdog. If this feature is enabled at the side of "Client", Ping IP Address should be the
IP address of the AP the Client is connecting to.
Ping Interval： Specify time interval (in seconds) between the pings requests are sent
by the Ping Watchdog
Start-up Delay: specify initial time delay (in seconds) until first ping request is sent by
the Ping Watchdog
Ping Failure： Specify the number of ping replies. If the specified number of ping replies
is not received continuously, the Ping Watchdog will reboot the device.
Note： If users want to modify the parameters of Ping Watchdog, please disable it first
and then apply. When the web page shows that Ping Watchdog is really disabled, users
can now re-enable it with modified parameters.
58