Led Configuration - HIKVISION DS-3WF01C-2N User Manual

User Manual of DS-3WF01C-2N
Figure 5-6 SSH
Note : after saving the configuration of administration page, the device will
automatically close telnet access, the user can login the device through more secure
SSH.
System->Software, Startup and Scheduled Tasks pages: it is not recommended to
operating, just keep the default configuration.
5.3

LED Configuration

Click on System->LED Configuration, in this page you can customize the behavior of the
device LEDs if possible; it defines the value of the signal strength required for the light of
the 3 LEDs, which works only on the client mode device.
25