HIKVISION DS-3WF01C-2N Quick Start Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Switch
  5. DS-3WF01C-2N
  6. Quick start manual
HIKVISION DS-3WF01C-2N Quick Start Manual

HIKVISION DS-3WF01C-2N Quick Start Manual

Wireless bridge
Hide thumbs Also See for DS-3WF01C-2N:
Table of Contents

Advertisement

Quick Links

Download this manual
DS-3WF01C-2N Quick Start Guide
DS-3WF01C-2N
Quick Start Guide
i

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-3WF01C-2N

Summary of Contents for HIKVISION DS-3WF01C-2N

  • Page 1 DS-3WF01C-2N Quick Start Guide DS-3WF01C-2N Quick Start Guide...
  • Page 2 INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS.
  • Page 3 DS-3WF01C-2N Quick Start Guide Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.

  • Page 4: Applicable Models

    DS-3WF01C-2N Quick Start Guide Applicable Models This manual is applicable to switches below: DS-3WF01C-2N (product series). Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Provides additional information to emphasize or supplement important points of the main text.
  • Page 5 DS-3WF01C-2N Quick Start Guide Catalog Chapter 1 Introduction ....................... 5 1.1 Overview ..........................5 1.2 Packing List ..........................5 1.3 Appearance ..........................5 1.3.1 Front Panel ........................5 Chapter 2 Installation ......................... 7 Chapter 3 Prepare ........................9 Chapter 4 Configuration ......................11...

  • Page 6: Chapter 1 Introduction

    DS-3WF01C-2N Quick Start Guide Chapter 1 Introduction 1.1 Overview The DS-3WF01C-2N wireless bridge can be applied to elevator internal monitoring video transmission, and can use the multi-network port to connect to the elevator advertising machine for real-time data update. 1.2 Packing List The packing list is shown as below.
  • Page 7 DS-3WF01C-2N Quick Start Guide Front Panel of DS-3WF01C-2N Figure 1-1 DS-3WF01C-2N Front Panel Physical Interface The hardware interfaces of the DS-3WF01C-2N are as follows. Figure 1-2 Physical Interface Table 1-1 Physical Interface Index Description Access to the camera, digital signage and other equipments...

  • Page 8: Chapter 2 Installation

    DS-3WF01C-2N Quick Start Guide Chapter 2 Installation Step 1 First install the mounting bracket on the main unit. The supporting bracket of the device contains a magnet to help the device automatically adsorb on the surface of the iron-containing material.
  • Page 9 DS-3WF01C-2N Quick Start Guide Step 3 Install the CPE device on top of the elevator, as shown below: Figure 2-3 Finish installation  The device must be installed without direct obstruction and the two devices are aligned up and down.

  • Page 10: Chapter 3 Prepare

    DS-3WF01C-2N Quick Start Guide Chapter 3 Prepare Step 1 Use a network cable to connect the computer to the LAN interface of the device to prepare the device. First, you need to configure the computer IP address and the device's default IP address to be on the same network segment.
  • Page 11 DS-3WF01C-2N Quick Start Guide Step 3 Double-click Internet Protocol Version 4 (TCP/IPv4). As shown below. Figure 3-3 Internet Protocol Version 4 (TCP/IPv4) Step 4 Configure the IP address of the computer to be the unused 192.168.1.X address in the LAN.

  • Page 12: Chapter 4 Configuration

    DS-3WF01C-2N Quick Start Guide Chapter 4 Configuration After the preparation is completed, start the device configuration. Step 1 Make sure that the IP address of the computer is inconsistent with the default IP address of the device. On the same network segment, use a browser to log in to the device, open a browser, and enter the default IP address of the device in the address bar: 192.168.1.35 / 192.168.1.36.
  • Page 13  The default SSID of the AP device and the CPE device must be the same to directly interconnect and transmit audio, video or data. If there are other DS-3WF01C-2N devices within 500 meters, the SSID should be changed to be different in order to avoid connection confusion.
  • Page 14 DS-3WF01C-2N Quick Start Guide Figure 4-3 Wizard Users can also click the “Network” bar at the top of the page to enter the “Wireless” page, click the “Edit” button and modify the network name, frequency, key and other parameters.
  • Page 15 DS-3WF01C-2N Quick Start Guide Figure 4-4 Wireless For the CPE device configuration, please refer to the AP device configuration.
  • Page 16 DS-3WF01C-2N Quick Start Guide...

Table of Contents