Interface Configuration - HIKVISION DS-3WF01C-2N User Manual

User Manual of DS-3WF01C-2N

7.2.2 Interface Configuration

Per network settings like encryption or operation mode are grouped in the Interface
Configuration.
Figure 7-22 Interface Configuration – General Setup
ESSID: Name of a wireless. It is used to control the access to the wireless network, only
the same ESSID can communicate with each other to establish a local area network.
Mode: There are totally 4 wireless modes, including: Client, Access Point, Client (WDS)
and Access Point (WDS).
Access Point: Access point.
Client: A client device that can connect to an AP.
Client (WDS): Use WDS feature to link multiple APs in a network, all associated stations
from any AP can communicate with each other like in ad-hoc mode. Client (WDS) means
this device is a client in WDS mode.
Access Point (WDS)： Use WDS feature to link multiple APs in a network, all associated
stations from any AP can communicate with each other like in ad-hoc mode. WDS AP
means this device is an AP in WDS mode.
Network: Choose the network(s) you want to attach to this wireless interface or fill out
the create field to define a new network.
50