Restore To Factory Settings - HIKVISION DS-3WF01C-2N User Manual

User Manual of DS-3WF01C-2N
1. DS-3WF01C-2N Device
2. I/P: 12V 1A power adaptor (Model: DSA-12G-12FEU 120120; Brand: DVE)
3. Mount Bracke t
4. Three LAN port on the device can be connected to the camera
There are two devices within a package: DS-3WF01C-2N (T) and DS-3WF01C-2N (R), two
I/P: 12V 1A power adaptors. The DS-3WF01C-2N (T) should be mounted on top of the
elevator car; it's normally linked up with network cameras and other network
advertising screens equipment through the network cable. DS-3WF01C-2N (R) should be
installed in the elevator room, for receiving the network signal. The two devices can be
fixed by each hoop.
You can use I/P: 12V 1A power supply for the device. The LAN port of the device can be
used for connecting cameras.
2.2

Restore to Factory Settings

In some cases, users can restore the device to factory settings. Push the reset button for
5~10 seconds and wait for 2~3 minutes. The device will restore to factory settings.
Figure 2-2 Reset
12