Connecting A Stereo Audio Receiver (Or Powered Speakers) With Rca To Rca Jacks; Connecting Your Tv Audio With Rca To Rca Jacks - NETGEAR MP115 User Manual

IN jack on your RF modulator.
• Connect an RF coaxial cable (not supplied) to the RF OUT, ANTENNA OUT, or to TV jack on the RF
modulator. The RF OUT jack may be labeled differently among different brands. Refer to the
instructions provided with your RF modulator. Connect the other ends of the same RF coaxial cable to
the ANTENNA IN or RF-IN jack on your TV.
Note: Your RF modulator should have a Channel 3/4 switch. The setting of this switch determines
the TV channel on which you will watch materials playing on the Digital Media Player. Set the RF
modulator's Channel 3/4 switch to either 3 or 4, whichever TV channel is least used in your area. If
your RF modulator has a Modulator/Antenna switch, set it accordingly. Refer to the instructions
that came with the RF modulator. Turn on your TV and choose channel 3 or 4. Choose the same
channel to which you set the RF modulator's Channel 3/4 switch.

Connecting a Stereo Audio Receiver (or Powered Speakers) with RCA to RCA Jacks

• Refer to the connection diagram given below. If you have a stereo receiver (or powered speakers) with
RCA analog input. Connect the supplied audio cable to the Digital Media Player's AUDIO L/R audio
jacks. Connect the other ends of the audio cable to the AUDIO L/R audio jacks on the stereo receiver (
or powered speakers). Match the cable colors to the jack colors.
• Set the stereo receiver to the correct AUDIO IN channel or sound source. Refer to the stereo owner's
manual for details.

Connecting Your TV Audio with RCA to RCA Jacks

• Refer to the connection diagram given below. Connect the supplied audio cable with RCA line input
jacks (which has red and white markings) to the Digital Media Player's AUDIO L/R audio jacks.
2BDF0-020017 REV.00
Page 14 of 36