NETGEAR MP115 User Manual page 32

Specifications and Regulatory
This section defines the general requirements for physical, electrical, mechanical, safety, and EMC of
MP115 by client and DELTA/DHBU. These requirements help to ensure that items shipped to client are
received in satisfactory condition. The related notices are as following:
Product Name
Versions Needed
Case
External Dimensions
Weight
Power Supply
Power Cable
Standby Mode
Memory (Flash/RAM/DRAM)
CPU
MAC Address Range
10/100Mbps Ethernet Port
Ethernet Port LEDs
Uplink Button or Auto-MDIX
Ethernet Cable
Wireless (Atheros mini-PCI wireless
card)
Wireless Channels
Antenna
Peak Antenna Gain
2BDF0-020017 REV.00
Item
Features
MP115 Wireless Audio/Video Digital Media Player
NA (North America), UK (United Kingdom)
Hardware
Metal with plastic front bezel
240(L) x 186(W) x 127.5(H) mm
Uses an internal power supply. 100~240V/50~60Hz/~0.35A
input localized plug throughout the world, and automatically
detect the AC line level. +12V/–1.25A/15W (max.) output to
main board
1.8m 3-prong electrical plug with safety rating of 18
AWG/3C
black power cable, or the power cable will change to localize
throughout the world
Instant on/off
4MB Flash (upgradeable firmware)/8MB SDRAM/32MB
DRAM
®
Ali T6306 Media Adapter Multimedia Processor
P
P
NETGEAR specified
1 RJ-45 Ethernet port (IEEE 802.3i/3u), connect to an
Ethernet 10BASE-T/100BASE-TX network, Port loopback,
Link integrity, Auto-detect port speed; Link/Activity LEDs in
jack
Link/Activity for Ethernet in RJ-45 jack
Auto-MDI/MDIX, Auto uplink
CAT5 Ethernet cable (10ft.) that colored BLUE
• IEEE 802.11g/b wireless LAN interface operating in the
2.4GHz ISM Band and support Atheros 108Mbps
throughput
• Supports 802.11g/b infrastructure and peer-to-peer (Ad-
Hoc) mode
• Supports Wired Equivalent Privacy (WEP) with 64/128-bit
key, WPA, and AES
• Supports DHCP or static IP addressing
• RF transceiver for 802.11 g/b
By region, country code limit channel selection (NA: 1~11,
Europe: 1~13, Japan: 1~14)
• External antenna gain (max.: ≥2dBi, average: ≥ 1.5dBi)
• Internal antenna gain (max.: ≥1dBi, average: ≥0dBi)
• Rotation on connector (perpendicular to the antenna base (
-90 to +90 degrees)
• Bandwidth: 2400~2484MHz, at return loss ≤-10dB
• External/Internal RF power handling: 200mW
>2dBi, when antenna integrated to the unit
Description
Page 32 of 36