Section 4: Operations; Operation Overview - Grizzly G0796 Owner's Manual

SECTION 4: OPERATIONS

Operation Overview

The purpose of this overview is to provide the nov-
ice machine operator with a basic understanding
of how the machine is used during operation, so
the machine controls/components discussed later
in this manual are easier to understand.
Due to the generic nature of this overview, it is
not intended to be an instructional guide. To learn
more about specific operations, read this entire
manual, seek additional training from experienced
machine operators, and do additional research
outside of this manual by reading "how-to" books,
trade magazines, or websites.
To reduce your risk of
serious injury, read this
entire
using machine.
To reduce risk of eye or face injury from
flying chips, always wear approved safety
glasses and a face shield when operating
this machine.
If you are not experienced with this type
of machine, WE STRONGLY RECOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.
Model G0796/G0797 (Mfd. Since 1/18)
manual BEFORE
To complete a typical operation, the operator
does the following:
1.
Examines workpiece to make sure it is suit-
able for milling.
2. Positions table according to operation and
size of workpiece.
3. Firmly clamps workpiece to table or a mill
vise.
4. Installs correct cutting tool for operation.
5. Uses manual downfeed and table controls to
correctly position cutting tool and workpiece
for operation. If X-axis power feed will be used
during operation, operator confirms speed
and length of table movement required.
6. Configures mill for correct spindle speed of
operation.
7. Puts on required safety glasses and face
shield, and makes sure workpiece and table
are clear of all tools, cords, and other items.
8. Turns mill ON by starting spindle rotation,
then performs operation.
9. Turns mill OFF.
-29-