Connecting To The B30 Relay - GE B30 Instruction Manual

1.3 ENERVISTA UR SETUP SOFTWARE
5. Expand the sections to view data directly from the B30 device.
1
Each time the EnerVista UR Setup software is initialized, click the Quick Connect button to establish direct communica-
tions to the B30. This ensures that configuration of the EnerVista UR Setup software matches the B30 model number.
When direct communications with the B30 via Ethernet is complete, make the following changes:
1. From the Windows desktop, right-click the My Network Places icon and select Properties to open the network con-
nections window.
2. Right-click the Local Area Connection icon and select the Properties item.
3. Select the Internet Protocol (TCP/IP) item from the list provided and click the Properties button.
4. Set the computer to "Obtain a relay address automatically" as shown.
If this computer is used to connect to the Internet, re-enable any proxy server settings after the computer has been discon-
nected from the B30 relay.
AUTOMATIC DISCOVERY OF ETHERNET DEVICES
The EnerVista UR Setup software can automatically discover and communicate to all UR-series IEDs located on an Ether-
net network.
Using the Quick Connect feature, a single click of the mouse triggers the software to automatically detect any UR-series
relays located on the network. The EnerVista UR Setup software then proceeds to configure all settings and order code
options in the Device Setup menu. This feature allows the user to identify and interrogate all UR-series devices at a loca-
tion.
When unable to connect because of an "ACCESS VIOLATION," access Device Setup and refresh the order code for the
device.
1-14 B30 Bus Differential System
1 GETTING STARTED

1.3.5 CONNECTING TO THE B30 RELAY

GE Multilin