Connecting The Tool - Makita DVC260 Instruction Manual

Connecting extension wand and nozzle
1
1. 2. Free nozzle 3.
Connecting hose and extension wand
1. Hose 2.
NOTE:
directly.

Connecting the tool

For dust extraction type only
Connect the front cuff on the hose with the tool's
extraction outlet.
1. Front cuff 2.
detached by turning it counterclockwise while holding
the hose. When connecting, make sure that the front
cuff is securely screwed in the hose.
2
1
2
3
3. Free nozzle
1
3
1. Hose 2. Front cuff
When using the front cuff 24, insert it to the front cuff 22
that is connected to the hose.
1
1. Front cuff 22 2. Front cuff 24
Attaching bent pipe assembly
For dust extraction type, use the optional bent pipe
assembly, unscrew the front cuff from the hose and
fasten the sleeve of bent pipe assembly onto the hose.
1
1
2
1. Hose 2. Bent pipe assembly 3. Sleeve
CAUTION:
properly installed. Otherwise the vacuumed dust or
particles may be exhausted from the cleaner and
they may cause respiratory disease to the operator.
8 ENGLISH
2
2
2
3