Transducer Inputs/Outputs - GE C60 Instruction Manual

6.3 METERING
Actual values for the IEC 61850-90-5 PDU size are provided. These values allow you to know the approximate Ethernet
frame size for the data streams from each aggregator. This can help to estimate network loading. The PDU size shown in
the displays does not include the Ethernet, UDP, or IP layers. PDU sizes approaching approximately 1500 bytes result in
fragmented data frames, causing increased network traffic.
PATH: ACTUAL VALUES
 DCMA INPUT xx

Actual values for each dcmA input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value followed by the programmed units.
PATH: ACTUAL VALUES
 RTD INPUT xx

Actual values for each RTD input channel that is enabled are displayed with the top line as the programmed channel ID and
the bottom line as the value.
6
6-24
 
METERING TRANSDUCER I/O DCMA INPUTS
DCMA INPUT xx
0.000 mA
 
METERING TRANSDUCER I/O RTD INPUTS
RTD INPUT xx
-50 °C
C60 Breaker Protection System
6 ACTUAL VALUES

6.3.10 TRANSDUCER INPUTS/OUTPUTS


DCMA INPUT xx

RTD INPUT xx
GE Multilin