Cisco Nexus 7000 series Configuration Manual page 24

Enabling FCoE
SUMMARY STEPS
1. configure terminal
2. (Optional) feature lacp
3. system qos
4. service-policy type network-qos policy-name
5. (Optional) show feature
6. (Optional) copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1 configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2
feature lacp
Example:
switch(config)# feature lacp
Step 3 system qos
Example:
switch(config)# system qos
Step 4 service-policy type network-qos policy-name
Example:
switch(config-sys-qos)# service-policy type
network-qos default-nq-7e-policy
Step 5 show feature
Example:
switch(config-sys-qos)# show feature
Step 6
copy running-config startup-config
Example:
switch(config-sys-qos)# copy running-config
startup-config
Cisco NX-OS FCoE Configuration Guide for Nexus 7000 and MDS 9500
12
Purpose
Enters configuration mode.
(Optional)
Enables the Link Aggregation Control Protocol (LACP)
feature. This feature is considered a best practice for FCoE
operation.
Enters Quality of Service (QoS) configuration mode.
Enables the QoS policy that supports FCoE traffic. The
policy-name default is default-nq-6e-policy.
(Optional)
Displays information about the enabled features.
(Optional)
Copies the running configuration to the startup
configuration.
FCoE
OL-25809-02