Verifying The Fcoe Configuration - Cisco Nexus 7000 series Configuration Manual

FCoE
Command or Action
Step 5
copy running-config startup-config
Example:
switch(config-if)# copy running-config
startup-config

Verifying the FCoE Configuration

To display FCoE configuration information, perform one of these tasks:
Command
show fcoe
show fcoe database
show interface vfc [number]
show interface [interface number] fcoe
This example shows how to verify that the FCoE capability is enabled:
switch# show fcoe
Global FCF details
This example shows how to display the FCoE database:
switch# show fcoe database
------------------------------------------------------------------------------
INTERFACE
------------------------------------------------------------------------------
vfc3
This example shows how to display the FCoE settings for an interface.
switch# show interface ethernet 1/37 fcoe
Ethernet1/37 is FCoE UP
OL-25809-02
FCF-MAC is 00:0d:ec:6d:95:00
FC-MAP is 0e:fc:00
FCF Priority is 128
FKA Advertisement period for FCF is 8 seconds
FCID
0x490100
vfc3 is Up
FCID is 0x490100
PWWN is 21:00:00:1b:32:0a:e7:b8
MAC addr is 00:c0:dd:0e:5f:76
Purpose
(Optional)
Copies the running configuration to the startup configuration.
PORT NAME
21:00:00:1b:32:0a:e7:b8 00:c0:dd:0e:5f:76
Cisco NX-OS FCoE Configuration Guide for Nexus 7000 and MDS 9500

Verifying the FCoE Configuration

Purpose
Displays whether FCoE is enabled
on the switch.
Displays the contents of the FCoE
database.
Displays information about the
vFC interfaces.
Displays the FCoE settings for an
interface or all interfaces.
MAC ADDRESS
19