Makita DF012D Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Drill
  5. DF012D
  6. Instruction manual

Makita DF012D Instruction Manual

Hide thumbs Also See for DF012D:
Table of Contents

Advertisement

Quick Links

See also: Instruction Manual
INSTRUCTION MANUAL
Cordless Driver Drill
DF012D
Read before use.

Advertisement

Table of Contents
loading

Related Manuals for Makita DF012D

Summary of Contents for Makita DF012D

  • Page 1 INSTRUCTION MANUAL Cordless Driver Drill DF012D Read before use.

  • Page 2: Specifications

    SPECIFICATIONS Model: DF012D Drilling capacities Steel 5 mm Wood 6 mm Fastening capacities Wood screw ø3.8 mm x 45 mm Machine screw No load speed High (2) 650 min Low (1) 200 min Overall length With straight shape 273 mm...

  • Page 3: General Power Tool Safety Warnings

    Prevent unintentional starting. Ensure the SAFETY WARNINGS switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with General power tool safety warnings your finger on the switch or energising power tools that have the switch on invites accidents. WARNING: Remove any adjusting key or wrench before Read all safety warnings and...

  • Page 4: Cordless Driver Drill Safety Warnings

    Some material contains chemicals which may have been altered, may result in the battery bursting be toxic. Take caution to prevent dust inhala- causing fires, personal injury and damage. It will also tion and skin contact. Follow material supplier void the Makita warranty for the Makita tool and charger. safety data. SAVE THESE INSTRUCTIONS. Tips for maintaining maximum battery life...

  • Page 5: Functional Description

    Lock lever FUNCTIONAL DESCRIPTION CAUTION: When not operating the tool, always set the lock lever in the locked position B. CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge CAUTION:...

  • Page 6: Speed Change

    Speed change CAUTION: Always set the speed change lever fully to the correct position. If you operate the tool with the speed change lever positioned halfway between the "1" side and "2" side, the tool may be damaged. CAUTION: Do not use the speed change lever while the tool is running. The tool may be damaged. Position of Speed Torque...
  • Page 7 Guideline for clutch auto stop Work range of clutch auto-stop Increments on adjusting ring Fastening torque for fastening torque High Approx. 0.3 N•m (Approx. 3 Kgf•cm) Approx. 0.82 N•m (Approx. 8.4 Kgf•cm) Approx. 1.35 N•m (Approx. 13.8 Kgf•cm) Approx. 1.88 N•m (Approx. 19.2 Kgf•cm) Approx. 2.41N•m (Approx. 24.6 Kgf•cm) Approx. 2.9 N•m (Approx. 30 Kgf•cm) At low speed, approx. 8 N•m (Approx. 81.6 Kgf•cm) At high speed, approx. 1.5 N•m (Approx. 14.7 Kgf•cm) When driving machine screws Increments Guideline for machine screw diameter 1 - 3...

  • Page 8: Operation

    For tool with shallow driver bit hole NOTE: If the driver bit is not inserted deep enough into the sleeve, the sleeve will not return to its original A=12mm Use only these type of driver position and the driver bit will not be secured. In this B=9mm bit. Follow the procedure case, try re-inserting the bit according to the instruc- 1. (Note) Bit-piece is not necessary.

  • Page 9: Maintenance

    To maintain product SAFETY and RELIABILITY, Hold the tool firmly and exert care repairs, any other maintenance or adjustment should CAUTION: be performed by Makita Authorized or Factory Service when the drill bit begins to break through the Centers, always using Makita replacement parts. workpiece. There is a tremendous force exerted on the tool/drill bit at the time of hole break through. CAUTION: A stuck drill bit can be removed simply by setting the reversing switch to reverse rotation in order to back out.

  • Page 10: Optional Accessories

    OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regard- ing these accessories, ask your local Makita Service Center.

Table of Contents