Selecting loading point
For a magazine, if more than one loading point was set-up, using the "Select loading point"
softkey, you have the option of opening a window in which you can assign a loading point to
a magazine.
Procedure
Turning
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
1.
Select the "Program Manager" operating area.
2.
Position the cursor on the file with the backed-up tool and zero point
data (*.INI) that you wish to re-import.
3.
Press the <Cursor right> key
- OR -
Double-click the file.
The "Read-in setup data" window opens.
4.
Select the data (e.g. magazine assignment) that you wish to read-in.
5.
Press the "OK" softkey.
Program management
14.13 Setup data
615