Parameters
Function, gripping
Coordinate
system
XP
ZP
Flush chuck
DIR
S
α1
Z1
ZR
FR
Fixed
stop
Parameters
Function, withdrawing
Also take zero point
Work offset
Z1
F
Turning
Operating Manual, 07/2010, 6FC5398-8CP40-0BA0
Description
Teaching in the park position and angular offset is possible
Machine
The park position is specified in the machine coordinate system. Teaching in
the park position and angular offset is only possible in the Machine.
Work
The park position is specified in the workpiece coordinate system.
Park position of tool in X direction (abs)
Park position of tool in Z direction (abs)
Flush counterspindle chuck
Yes
No
Direction of rotation
Spindle rotates clockwise
Spindle rotates counterclockwise
Spindle does not rotate
Spindle speed – (only when the spindle rotates)
Angular offset
Transfer position (abs.)
Position, feedrate reduction (abs or inc)
Position from which a reduced feedrate is used.
Reduced feedrate
Travel to fixed stop
Yes
The counterspindle stops at a defined distance away from transfer position Z1
and then traverses with a defined feedrate up to the fixed stop.
No
The counterspindle traverses to the transfer position Z1.
Description
Also take zero point
Yes
No
Work offset in which the coordinate system offset by Z1 must be saved.
Basic reference
G54
G55
G56
G57
...
Amount by which the workpiece is withdrawn from the main spindle (inc)
Feedrate
Programming technology functions (cycles)
8.7 Further cycles and functions ShopTurn
Unit
mm
mm
rev/min
Degrees
mm/rev
Unit
mm/min
457