How To Configure A Default Dmz Server - NETGEAR DG834PN Reference Manual

Reference Manual for the Model DG834PN 108 Mbps RangeMax
Note: For security reasons, you should avoid using the Default DMZ Server feature.
When a computer is designated as the Default DMZ Server, it loses much of the
protection of the firewall, and is exposed to many exploits from the Internet. If
compromised, the computer can be used to attack your network.
Incoming traffic from the Internet is normally discarded by the wireless ADSL modem router
unless the traffic is a response to one of your local computers or a service that you have configured
in the Ports menu. Instead of discarding this traffic, you can have it forwarded to one computer on
your network. This computer is called the Default DMZ Server.

How to Configure a Default DMZ Server

To assign a computer or server to be a Default DMZ server, follow these steps:
Log in to the wireless ADSL modem router at its default LAN address of http://192.168.0.1
1.
with its default User Name of admin, default password of password, or using whatever
Password and LAN address you have chosen for the wireless ADSL modem router.
From the Main Menu, under Advanced, click the WAN Setup link to view the page shown in
2.
Figure 7-1:
Figure 7-1: WAN Setup Page
Select the Default DMZ Server check box.
3.
Type the IP address for that server.
4.
Click Apply to save your changes.
5.
7-2
TM
August 2005
Wireless ADSL Modem Router
Advanced Configuration