This chapter describes how to configure the wireless features of your DG834PN 108 Mbps
RangeMax
Wireless ADSL Modem Router.
TM
Considerations for a Wireless Network
In planning your wireless network, you should consider the level of security required. You should
also select the physical placement of your wireless ADSL modem router in order to maximize the
network speed. For further information, refer to
To ensure proper compliance and compatibility between similar products in your area, the
operating channel and region must be set correctly.
Observe Performance, Placement, and Range Guidelines
The operating distance or range of your wireless connection can vary significantly based on the
physical placement of the wireless firewall. The latency, data throughput performance, and
notebook power consumption also vary depending on your configuration choices.
Note: Failure to follow these guidelines can result in significant performance
degradation or inability to wirelessly connect to the router. For complete range/
performance specifications, please see
For best results, place your firewall:
•
Near the center of the area in which your computers will operate
•
In an elevated location such as a high shelf where the wirelessly connected computers have
line-of-sight access (even if through walls)
•
Away from sources of interference, such as computers, microwaves, and cordless phones
•
With the Antenna tight and in the upright position
•
Away from large metal surfaces
Wireless Configuration
Wireless Configuration
Appendix D, "Wireless Networking
Appendix A, "Technical
August 2005
Chapter 4
Basics".
Specifications".
4-1