Maintenance; Replacing Carbon Brushes - Makita M4302 Instruction Manual

Hide thumbs Also See for M4302:

Table of Contents

Enlarged version

MAINTENANCE

CAUTION:

•

Always be sure that the tool is switched off and

unplugged before attempting to perform inspec-

tion or maintenance.

•

Never use gasoline, benzine, thinner, alcohol

or the like. Discoloration, deformation or cracks

may result.

► 1 . Limit mark

Remove and check the carbon brushes regularly.

Replace when they wear down to the limit mark. Keep

the carbon brushes clean and free to slip in the holders.

Both carbon brushes should be replaced at the same

time. Use only identical carbon brushes.

Use a screwdriver to remove the brush holder caps.

Take out the worn carbon brushes, insert the new ones

and secure the brush holder caps.

► 1 . Screwdriver 2. Brush holder cap

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be per-

formed by Makita Authorized Service Centers, always

using Makita replacement parts.

7 ENGLISH

Table of Contents