Configuring The Intrusion Detection Unit - Honeywell Galaxy Dimension series Integration Manual

Configuring the intrusion detection unit

To receive intrusion events and alarms from the Galaxy Dimension control panel in Security
Desk, you need to configure the intrusion detection unit (panel) in Config Tool.
This section includes the following topics:
•
"Configure intrusion detection unit properties"
•
"Map inputs to intrusion detection areas"
•
"Set the time zone"
•
"Create custom event mappings"
•
"Configuring the heartbeat connection"
gtap.genetec.com | Honeywell Galaxy Control Panel Integration Guide 5.2
EN.550.007-V5.2.C4(3) | Last updated: March 11, 2014
on page 27
on page 29
on page 30
on page 30
Configuring the intrusion detection unit
on page 24
23