Honeywell Galaxy Dimension series Integration Manual page 21

For more information about configuring the communication mode, see "56.6.1 Mode" in
the Honeywell Galaxy Dimension Installer Manual.
Set the alarm signalling
2
SIA level 4 allows Security Center to control the Galaxy Dimension control panel.
For more information about programming the SIA format, see "56.1.2 = SIA (Security
Industries Association)" in the Honeywell Galaxy Dimension Installer Manual.
Create the
3
The account number must be a unique number that identifies the site. It can have up to six
digits.
Best practice:
For more information about creating an account number, see "56.6.3 Account No. " in the
Honeywell Galaxy Dimension Installer Manual.
4 Configure the
The RS-232 port serial communication settings must match the settings of the Security
Center serial COM port used to communicate with the intrusion detection unit. See
the Intrusion detection unit"
For more information about configuring the communications setup on the control panel,
see "56.6.4 Comms Setup" in the Honeywell Galaxy Dimension Installer Manual.
gtap.genetec.com | Honeywell Galaxy Control Panel Integration Guide 5.2
EN.550.007-V5.2.C4(3) | Last updated: March 11, 2014
as SIA, and the
Format
Account Number (Account No.).
Do not start the account number with a zero.
Comms Setup.
on page 21.
Preconfiguration checklist
to level 4.
SIA level
"Create
16