Honeywell Galaxy Dimension series Integration Manual page 37

8 From the
Click OK, and click Apply.
9
10 Select the input you configured as the Link destination on your panel (input 2).
11 At the bottom of the Peripherals tab, click
12 In the dialog box that opens, from the
intrusion detection area to map to the input.
IMPORTANT
control panel. For more information, see "52.10=Group" in the Honeywell Galaxy Dimension
Installer Manual.
From the
13
input 2 on the panel.
14 Click OK, and click Apply.
Input 1 now receives the heartbeat from the Intrusion Manager role, and input 2 triggers an
action if the connection is broken.
gtap.genetec.com | Honeywell Galaxy Control Panel Integration Guide 5.2
EN.550.007-V5.2.C4(3) | Last updated: March 11, 2014
Input function drop-down list, select
The intrusion detection area must be the same group the input is part of on the
drop-down list, select
Input function
Configuring the intrusion detection unit
17 - Link.
Edit the item ( ).
Intrusion detection areas
Log, or the function you configured for
26 -
drop-down list, select an
32