Table of Contents
Advertisement
Set the
take when the connection between Security Center and the control panel is lost (for
example, the
For more information about how to configure an input's function, see "Option 52- Program
Zones" in the Honeywell Galaxy Dimension Installer Manual.
2
Create a link from input 1 to a free latch timer.
Using the keypad, set the
Set the
60 seconds.
Every time the Intrusion Manager messages input 1, the link is activated. When the link
is deactivated, the link timer counts down from the latch timer value. If the timer reaches
zero, it means the connection between Security Center and the panel is lost. This
activates the latch timer, which triggers another link.
For information about creating links on your control panel, see "Option 54 - Links" in the
Honeywell Galaxy Dimension Installer Manual.
3
Create a second link from the latch timer to input 2.
Set the
Set the
Configure the heartbeat connection in Security Center
1
From the Intrusion detection task in Config Tool, select the intrusion detection unit to
configure, and click the
2
From the
from the Intrusion Manager.
The input must be the one you configured as the Link source on the control panel
NOTE
(input 1). See
Click Apply.
3
4
Click the
5
Select the input you configured as the Link source on your panel (input 1).
At the bottom of the Peripherals tab, click
6
7
In the dialog box that opens, from the
intrusion detection area to map to the input.
IMPORTANT
control panel. For more information, see "52.10=Group" in the Honeywell Galaxy Dimension
Installer Manual.
gtap.genetec.com | Honeywell Galaxy Control Panel Integration Guide 5.2
EN.550.007-V5.2.C4(3) | Last updated: March 11, 2014
Function
for input 2 to a desired function. This function is the action you want to
26 - Log
function records in the event log that an input has been activated).
Link Source
as the
Link Destination
Link Source
as the latch timer.
Link Destination
as input 2.
Properties
Heartbeat input
drop-down list, select the input to receive the heartbeat messages
Step 1
in
"Configure the heartbeat connection on the control panel"
Peripherals
tab.
The intrusion detection area must be the same group the input is part of on the
Configuring the intrusion detection unit
as input 1.
Timer, and enter a latch timer value higher than
Latch
tab.
(
Edit the item
Intrusion detection areas
on page 30.
).
drop-down list, select an
31
Hide quick links:
Advertisement
Table of Contents
