Advanced Enervista 8 Series Setup Software Features; Sld Configurator - GE Multilin 850 Instruction Manual

CHAPTER 3: INTERFACES

Advanced EnerVista 8 Series Setup Software Features

SLD Configurator

850 FEEDER PROTECTION SYSTEM – INSTRUCTION MANUAL
The SLD Configurator allows users to create customized single line diagrams (SLD) for the
front panel display. The SLDs must be configured from the SLD Configurator in the
EnerVista 8 Series Setup software, located under
Configurator allows the user to have breakers, switches, metering, and status items on the
SLD.
Single line diagrams (SLD) are viewed from the relay front panel and individual SLD pages
can be selected for the default home screen pages. The 8 Series provides six (6) SLD pages.
Each page can have a combination of active and passive objects. Status, metering, and
control objects are active while the static images for bus, generator, motor, transformer,
ground, etc. are passive objects.
Figure 3-16: SLD Page
For optimum use, the first SLD page can be used for the overall single line diagram and the
subsequent pages can be used for breaker/switch specific CT/VT placement, metering and
status. Once the configurable SLDs are programmed, they are saved within the relay
settings file. The SLD pages can also be saved individually as local XML files. The locally
stored XML files can then be reloaded to generate another diagram. SLDs represent
objects using GE symbols (similar to ANSI).
Figure 3-17: Template SLD
SOFTWARE INTERFACE
Setpoints > SLD Configurator
. The SLD
3–39