Memory Scan - Cobra PR561 BLT Owner's Manual

Memory Scan

Your microTALK
locations.(See page 10 for setting memory locations)
MEM/ESC Button
Scan Button
Channel Button
18
radio can automatically scan the stored memory
®
To scan memory locations:
1. Make sure 2 or more memory locations
programmed already.
2. Press and release the MEM/ESC button to enter
Memory mode from Standby mode.
Memory icon and the Memory Location show
on the display.
3. Press and release the Scan button, Scan
icon and Memory icon will be displayed
simultaneously and then begin scanning stored
channel locations.
The Scan icon will continue to be displayed when
Memory Scan is On.
Your radio will continue to scan memory locations
and stop as an incoming transmission is detected.
Your radio will remain on that stored channel/
privacy code for 6 seconds.
•