Table of Contents
Advertisement
Set CTCSS Privacy Codes
Mode/Power
Privacy Code
Channel Button
To select a CTCSS privacy code:
1. After selecting a channel, press the Mode/Power
button until the CTCSS icon appears and the small
numbers next to the channel number flash on the
display. (00 through 38)
If DCS is turned on at the channel selected,
the display will flash the
CTCSS icon and "OFF." To switch from
DCS to CTCSS, press the Channel Up
or Channel Down button while the display
is flashing "OFF." The display
will then show the small numbers flashing
and you will then be able
to proceed to step 2.
2. Press using the Channel Up or Channel Down
button to select a privacy code. You can hold the
Up or Down button for fast advance.
3. When your desired CTCSS privacy code is
displayed, choose one of the following:
a. Press the Mode/Power button to enter the
new setting and proceed to other functions.
b. Press the Talk or Call/Lock button to return to
Standby mode.
c. Do not press any buttons for 12 seconds
to return to Standby mode.
•
7
Hide quick links:
Advertisement
Table of Contents
