Memory Locations - Cobra PR561 BLT Owner's Manual

10 Memory Locations

Your microTALK
your most frequently used channels and channel/privacy code
combinations. These Memory Locations can be selected individually or
can be scanned. (See page 18 for memory location scan.)
MEM/ESC Button
Channel Button
MEM/ESC Button
Channel Button
Memory Channel
Channel Button
10
radio has 10 Memory Locations for storing
®
To program a memory location:
1. Press and hold the MEM/ESC button until
Memory icon and the Memory Location blink
on the display.
2. Press the Channel Up or Channel Down button
to select the memory location (0 through 9).
If a location has been programmed before,
its associated channel/privacy code will be
shown on the display.
3. Press the MEM/ESC button to enter a
new memory location or edit an already
programmed memory location.
4. The channel numbers will flash on the display.
5. Press the Channel Up or Channel Down button
to select a channel (1 through 22).
6. Press the MEM/ESC button. The CTCSS icon
and privacy code numbers will flash on the
display.
7. Choose one of the following:
a. Press the Channel Up or Channel Down
button to select a CTCSS privacy code (00
through 38) for the channel.
b. Press the MEM/ESC button to switch from
CTCSS to DCS. The DCS icon and privacy code
numbers will flash on the display. The Channel
Up or Channel Down button can then be used
to select a DCS privacy code (00 through 83)
for the channel.
•