Cobra PR561 BLT Owner's Manual page 21

Privacy Code Scan
Your microTALK
(either CTCSS 01 through 38 or DCS 01 through 83) within one channel.
Only one set of privacy codes (CTCSS or DCS) can be scanned at a time.
Scan Button
Channel Button
Select Channel
Scan Privacy Codes
During scanning (while receiving an incoming transmission),
you can choose from the following:
a. Press and hold the Talk button to communicate on that privacy code
within the selected channel. Your radio will remain on that privacy
code and return to Standby mode.
b. Press the Channel Up or Channel Down button to resume
scanning.
c. Press and hold the Scan button to return to Standby.
radio can automatically scan the Privacy Codes
®
To scan privacy codes:
1. While in Standby mode, press and release the
Scan button twice (CTCSS) or three times (DCS)
until the CTCSS or DCS icon and numbers are
flashing.
2. Press and hold the Scan button to begin scanning
privacy codes within the selected channel.
The Scan icon will continue to be displayed when
privacy code scan is on. Your radio will continue
to scan privacy codes and stop as an incoming
transmission is detected. Your radio will remain on
that channel/privacy code for 4 seconds.
•
17