Cobra PR561 BLT Owner's Manual page 16

Ten Call Tone Settings
You can choose between ten different Call Tone Settings to transmit
a call alert.
Mode/Power
Call Tone Setting
Channel Button
VibrAlert and Call Alert
®
Call Tone On/
Vibrate On
Call Tone On/
Vibrate Off
12
To change a call tone setting:
1. Press the Mode/Power button until the
letter "C" and the current call tone number
(01 through 10) is displayed. The current
call tone will sound for three seconds.
2. Press the Channel Up or Channel Down button
to hear the other call tone settings.
3. Choose one of the following:
a. Press the Mode/Power button to enter the
new setting and proceed to other functions.
b. Press Talk or Call/Lock button to return to
Standby mode.
c. Do not press any buttons for 12 seconds to return
to Standby mode.
Your MicroTALK
signals by sounding an audible call tone or an
audible tone with VibrAlert
To change call settings:
1. Press the Mode button until the Call Setting
icon flashes on the display. The current setting
("01" vibrate + ring, "02" ring only) is displayed.
2. Press the Channel Up or Channel Down button to
change the call setting.
3. Choose one of the following:
a. Press the Mode button to enter the new
setting and proceed to other functions.
b. Press Talk or Call/Lock button to return to
Standby mode.
c. Do not press any buttons for 12 seconds to return
to Standby mode.
®
radio can alert you to incoming
® .
•
•