Table of Contents
Advertisement
Set DCS Privacy Codes
Mode/Power
DCS Privacy Code
Channel Button
2. Press using the Channel Up or Channel Down button to select a DCS
privacy code. You can hold the Up or Down button for fast advance.
3. When DCS privacy code is displayed, choose one of the following:
a. Press the Mode/Power button to enter the new setting and
proceed to other functions.
b. Press Talk or Call/Lock button to return to Standby mode.
c. Do not press any buttons for 12 seconds to return to Standby
mode.
8
To select a DCS privacy code:
1. After selecting a channel, press the Mode/Power
button until the DCS icon appears and the small
numbers flash on the display (00 through 83).
If CTCSS is turned on at the channel
selected, the display will flash the DCS
icon and "OFF." To switch from CTCSS to
DCS, press the Channel Up or Channel
Down button while the display is flashing
"OFF." The display will then show the
small numbers flashing and you will then
be able to proceed to step 2.
•
Hide quick links:
Advertisement
Table of Contents
