Maintenance And Upgrades; Connect The Dc Adapter For The 5506H-X - Cisco ASA 5506W-X Hardware Installation Manual

Maintenance and Upgrades

This chapter contains procedures for maintaining and upgrading your ASA, and contains the following
sections:
•
•

Connect the DC Adapter for the 5506H-X

You can order an optional DC power supply that supplies 24V DC (part number PWR2-20W-24VDC) or
20W 20-60V DC (part number PWR2-22W-20-60VDC).
This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the
Warning
protective device is rated not greater than 36 VDC, 5A. Statement 1005
This product requires short-circuit (overcurrent) protection to be provided as part of the building installation.
Warning
Install only in accordance with national and local wiring regulations.
The device is designed to work with TN power systems.
Warning
To connect the DC power on your 5506H-X, follow these steps:
Step 1 Connect the black and white lead wires to a 12 VDC source.
Online Only
Connect the DC Adapter for the 5506H-X, page 45
Install the Adjustable Power Supply Retainer, page 47
Cisco ASA 5506-X, ASA 5506W-X, and ASA 5506H-X Hardware Installation Guide
4
C H A P T E R
45